Enquire Now

Bio Finger IV

Innovative biometric fingerprint reader with built-in Wi-Fi card

This fingerprint reader can able to connect to your Wi-Fi and transfer the data to the software easily.

This machine built-in with push algorithm, so once the employee scanned his finger, the data will be pushed to server immediately via Wi-Fi.

It has the fastest commercial-based fingerprint matching algorithm with high performance, high-image quality optical fingerprint sensor. The 3” TFT can display more information vividly, including fingerprint image quality and verification result etc.

Fingerprint Attendance Reader

It has Built-in 2000 mAh backup battery can eliminate the trouble of power failure. The backup battery can supply power to the machine for 2- 3 hours. So, this model is most suitable where there is a frequent power failure and construction job site where there is limited or no power supply. The battery will get auto recharge once the reader connected to the power supply.

Up to 3 fingers per employee can be registered. While doing attendance the employee can use any on the finger to do clocking.

It takes about one second to verify the employee finger and the Date & time has been registered into the device.

If a particular employee all the finger damaged, then that employee can use PIN number for attendance purpose.

In-built Features

WIFI Built-in wifi card
Battery Built-in battery
Sensor Reliable Optical sensor
Data Transfer method WIFI / TCPIP Network (RJ 45) / USB Thumb drive
Capacity 3000 fingerprint Templates
Storage Memory 100,00 verification records
Primary Verification method Fingerprint
Secondary Verification method (optional) Proximity car / PIN number
Verification Message Audio message & displays the employee name
Screen Color 3” TFT screen with GUI interface

Technical Specifications

User capacity 3,000
Transaction Storage 100,000
Verification Mode 1:1, 1:N
Verification time <=2s
False Acceptance Rate (FAR) <=0.0001%
False Rejection Rate (FRR) 0.01%
Size 210W x 157H x 50D mm
Weight 505g
Keypad 16 keys (with 4 function keys)
Power Supply 12V DC 1.5A
Operating Temperature 0℃-45℃
Operating Humidity 20% – 80%